The N47 and N57 are among the most popular diesel engines fitted to BMWs over the past two decades — and also among those most often mentioned in connection with timing chain problems. This is neither rumour nor exaggeration: the design of these engines has a real, well-documented weakness that is worth knowing about before serious symptoms appear.
Why these engines in particular
In the N47 and N57 the timing chain sits on the gearbox side (at the rear of the engine) and not, as in many other designs, at the front. This makes service access harder: replacing it requires removing the gearbox, which significantly raises the labour and cost of the repair compared with “simpler” designs. Combined with the material and geometry of the chain guides in some examples, this area has become the best-known weakness of both engines.
Symptoms not to ignore
- Rattling or a metallic sound on a cold start — the most commonly reported early warning sign, especially if it fades after a few seconds of running.
- Noise from the front/rear of the powertrain that grows with mileage — a sign of progressive slack in the tensioning system.
- Uneven running or loss of power — can indicate the timing has jumped by individual teeth, even before a catastrophic failure.
- A lit engine warning light with codes relating to camshaft correlation — a direct signal from the control unit that something is wrong with timing synchronisation.
The key rule: a sound you hear only on a cold start that goes away after a moment is often the earliest point at which intervention is still relatively cheap. The longer a car runs with this symptom, the higher the risk that the repair stops being “planned” and becomes an emergency.
How computer diagnostics helps assess the risk
The sound alone is not always enough for an unambiguous assessment of the degree of wear. In computer diagnostics we check the camshaft–crankshaft correlation parameters and the history of any timing-related faults — deviations from reference values are a measurable signal before the symptom becomes audible to the naked ear. This lets us tell “worth planning a replacement in the coming months” from “this can wait” — without guessing.
Why delay can be expensive
A timing chain that jumps or breaks while driving, in an engine where the pistons can collide with the valves (an interference engine), usually leads to serious mechanical damage — broken valves, damaged pistons and, in extreme cases, the cylinder head. The cost of such an emergency repair is many times that of a planned chain replacement carried out at the first symptoms.
Which examples are most at risk
Most problems affect the earlier N47 engines, from before the modifications the manufacturer introduced around 2011. This does not mean later ones are free of risk, only that it happens less often. The design makes matters worse: the timing drive is at the rear of the engine, on the gearbox side. Replacement therefore takes a great deal of work, and a snapped chain usually ends in serious engine damage. The six-cylinder N57 has a similar layout, although problems occur in it less often.
How to reduce the risk
- Change the oil more often than the service indicator suggests. The condition of the oil has a direct effect on the tensioner and the guides.
- Listen to the engine on a cold start and at idle. A metallic noise or rattle from the rear of the engine is a signal to check, not to wait out.
- When buying a car, ask for documented timing replacement and for which parts were used.
- Don't delay. A planned replacement costs a fraction of what an engine repair after a snapped chain costs.
Buying a car with this engine? See also what we look at during pre-purchase BMW diagnostics.
Frequently asked questions
The design of these engines puts the timing chain on the gearbox side, which makes service access harder and means replacing it is more labour-intensive than in many other designs.
Rattling or a metallic sound on a cold start that fades after the engine has run for a moment is the most commonly reported early warning sign.
Indirectly, yes — through the camshaft and crankshaft correlation parameters and the history of timing faults. A final assessment of the degree of wear often also requires a physical check of the chain tension.
In the worst case, the chain snapping or jumping can lead to serious engine damage, far more expensive than a planned replacement.
Hearing a worrying sound on start-up?
Let's check the timing parameters before the symptom turns into a breakdown.
Book diagnostics