The N20, B48 and B58 are three successive generations of the same idea — a smaller, turbocharged engine instead of a larger, naturally aspirated one. The difference in reliability between them is considerable, though: the N20 has one well-known weakness that the B48 and B58 have largely avoided. This means maintenance recommendations differ depending on which version you have under the bonnet.
N20 — checking the timing chain is the priority
Recommendations
- Regularly listen for a rattle on a cold start — this is the earliest sign of wearing timing chain guides in this engine.
- Check the condition of the guides during other service work — rather than waiting for a clear symptom, ask your mechanic for a visual assessment during an oil change or other service.
- Don't delay reacting to a rattle — if ignored it can end with the sprockets jumping and much more serious, expensive engine damage.
B48 and B58 — a newer, sturdier design
Recommendations
- Watch the engine operating temperature — the first sign of trouble with the electric water pump, a typical failure point in this generation.
- Check the oil level — the valve cover gasket can become a source of a slow leak with age, so it is worth monitoring between changes.
- B58 — generally very low failure rate — it needs no special preventive measures beyond standard, on-time servicing.
Oil — one of the few things common to all three
Whichever engine version you have, it is worth using oil to the current BMW Longlife specification intended for that engine and not stretching the change interval beyond the recommendations — especially in the N20, where oil quality has extra importance for the life of the timing chain tensioner.
If you are buying a car with an N20, checking the timing chain should be the first item on your list — it is the only really serious known problem of this engine generation, and catching it early turns an expensive repair into a planned, much cheaper replacement.
The maintenance plan in brief
- Engine oil — change it more often than the computer indicates, especially with city driving.
- Spark plugs — they wear faster in turbocharged engines, and faster still after a power increase.
- Automatic gearbox oil — despite the claim of “lifetime” oil, changing it clearly extends the life of the gearbox.
- Coolant — check the level at every oil change.
- Air filter — a dirty one limits power and increases the load on the turbocharger.
Warning signs not to ignore
- a noise or whine from the front of the N20 engine that changes with revs,
- a loss of coolant with no visible leak,
- traces of oil around the oil filter housing and valve cover,
- a longer-than-usual start or uneven running when cold.
Planning a power increase? Get the engine in order first. We explain why this is the condition for a good result in the article Stage 1: how much power you really gain.
Frequently asked questions
It cannot be eliminated completely, but regularly checking the condition of the guides — before an audible rattle appears — lets you plan the replacement in advance instead of reacting only after more serious damage.
Closer to that than the N20, but not quite — the electric water pump and the valve cover gasket are still items worth checking periodically, especially at higher mileages.
Fully synthetic oil to the current BMW Longlife specification for the given engine — using the wrong specification can speed up wear of the turbocharging components and the variable valve timing system.
Want to check the condition of the timing chain in your N20?
We'll verify the condition of the guides and the engine's operating parameters before it turns into a serious fault.
Book diagnostics