Retrofitting a tow bar on a BMW G-series has two parts: the physical installation of the tow bar and wiring harness, and the software part: coding and matching the tow bar module (the trailer control unit) to the car. The tow bar is fitted by a separate company or a mechanical workshop. We take care of the software part, diagnostics and testing.
BMW G-series tow bar module retrofit: a car with the bonnet open and a power supply connected for the duration of the work.
This article is a general guide: what the tow bar module is, what exactly we do and what to expect from the job. For a specific example, see the case study BMW G31 tow bar retrofit.
What the tow bar module is
The tow bar module is the control unit responsible for the car working with a trailer: it powers and monitors the trailer socket and the trailer lights and communicates with the rest of the electronics. Thanks to it the car “knows” that it has a tow bar and that a trailer is connected. This matters for several systems, for example the parking sensors, the stability control systems or the lighting.
Simply fitting the tow bar and harness is not enough. Without the right configuration in the car, the tow bar remains invisible to it, and trailer-related functions do not work properly.
What the retrofit covers
The scope depends on the car and on the kit that has been fitted, but usually includes:
- checking how the car is configured and what it already contains,
- matching and coding the tow bar module so that the car includes it in its configuration,
- coding related functions in other control units, if needed,
- diagnostics: reading faults and checking the module's communication,
- a functional test after coding.
The detailed scope and order depend on the model, model year and equipment, so we settle them after reading the car. We do not claim a single universal procedure.
What we do not do
We do not physically fit the tow bar or the harness. That is mechanical work requiring the right parts and tools. It is usually best when the installation is done correctly and completely before our visit: then the software part goes smoothly. If anyone doubts that the harness is connected properly, diagnostics will show whether the module communicates.
What the work looks like at the customer's location
Most often we work on site: we come to the car, connect the interface and code. The photo shows a car in a car park with the bonnet open and power cables attached: during coding the car must have stable voltage, so we connect a supporting power supply. This limits the risk of interrupting the work because of a voltage drop.
- We read the car's configuration and faults.
- We connect the supporting power supply.
- We code and match the tow bar module.
- We check the faults again and test operation.
A tow bar that is fitted but not coded does not work as it should. Configuration is always part of the retrofit, not just the metal and the harness.
After coding
After coding we check the fault memory and whether the tow bar module reports in correctly. Where possible we test the trailer lights with a connected trailer or a tester. We pay attention to functions affected by the presence of a tow bar, for example the parking sensors.
Before the work we save a copy of the current coding, so if in doubt the previous settings can be restored. A retrofit often combines with other functions: see also BMW coding in Silesia, Comfort Access on the G-series and reversing camera on the G-series.
Frequently asked questions
No, the physical installation of the tow bar and harness is done separately. We take care of the software part: coding, diagnostics and testing.
Yes. Without configuration in the car, the tow bar remains invisible to it, and trailer-related functions do not work properly.
Yes, we usually work on site in Silesia, with the interface connected and a supporting power supply. We agree the scope before the visit.
No. It depends on the model, model year and equipment, so we read the car's configuration first.
Retrofitting a tow bar on your BMW G-series?
After installation we take care of coding, diagnostics and testing.
BMW coding